Barleyfields HEMP OIL 250ml

Product

Pure Hemp Oil 

Size

250ml, 1L

Description

Pure hemp seed oil (cold pressed from cannabis sativa spp.)

Used For

Timber finishes, chalk paint seal, skin care products

Surface Preparation

Before you begin, make sure your surface is clean and dust free. If you’re applying hemp oil over a piece painted with chalk paint, ensure you give the paint about 12 hours to dry before you apply the oil.

How to Apply

To Raw Timber

Hemp oil is a deep green colour but as a natural oil, will vary somewhat between batches. When first applied, it will deepen the colour of your finish (as if it were wet) but it will slowly lighten over time as the oil soaks in and cures.

Use a lint-free rag, or a paintbrush to apply hemp oil; sponges are also effective. Use sparingly - wipe one thin coat over the surface and let it soak into the finish for 12 hours.

Apply up to three coats for areas of higher wear (for example, timber chair seats, handrails, table tops etc.) Can be buffed to impart a gentle lustre.

Dry Time

12 hours but allow up to 30 days for full curing. Gentle use is fine up until that point.

Maintenance

For general maintenance and wear, simply re-apply as the surface becomes faded or dry. Normally only required every 2 years.

Clean Up

Warm, soapy water or a solvent such as Gilly’s Citrus Thin.

Safety

• Hang out rags to dry, or soak in water. Don’t leave scrunched up.
• Contact Gilly’s for SDS

Ingredients

Hemp seed oil  100%